The Early Rife Transducer  
Crude, home-made frequency generator... 

We have never been confused about what a Rife machine really is. We started 18 years ago with four different, independent sources. Some of them were from our own government and all were unimpeachable. 

It is important that you have no doubt and are not in the least confused. Here, we will try to straighten it out, once again... 

The picture above was digitized in the eighties using an early, greyscale hand scanner. It is distorted because the scanner slipped slightly during the scan. This picture was part of material we bought from John F.Crane. The unit was a modification from the original kit, which Rife bought from a maker of electronic hobbyist kits.  

The main dial on the front was the frequency adjust. It had to be calibrated and was very innacurate. Frequency accuracy was only within +/- 5 percent. 

We repaired several machines of this type that were owned by personal friends of Rife. All were modified function generators of various original manufacture. All contained vacuum tubes. None were properly grounded. 
 

For many years, our scratch built Model B was much the same, with a black insulating case, four position frequency channel selector, frequency adjust potentiometer, frequency counter, binding post, power switch with lighted indicator and top mounted carrying handle.